The Dual Flush system is amazing technology for those who are always concerned about their water bills. In the Dual Flash System, there are two flushing options; full-flush and half-flush. The two buttons are usually located on the top of the water tank, the smaller one is for half flush and the bigger one is for full-flush.
Now the question arises that what does it means by full-flush and half-flush. So, the answer is; half-flush is used to flush liquid waste. The quantity of water released from the tank is little whereas in the full-flush the quantity of water released for flushing is large. The full-flush option is used to remove solid waste from the toilet.
It saves a lot of water and also a lot of money. Sometimes, the dual flush mechanism needs to be adjusted for the perfect flush and anyone can do it without having any technical knowledge.
Let’s know how to adjust a dual-flush mechanism in just a few steps:
Table of Contents
How Dual Flush Toilet Works?
There are two buttons located on the top of the water tank lid. You have to choose the amount of water you want to use for a flush. The small flush button consumes an estimated amount of 3 liters whereas the bigger flush button consumes 5 liters of water.
In contrast to the single flush toilet system, it is more budget-friendly and eco-friendly. You can save a lot of water in this way.
What are the different sorts of toilet flushing frameworks?
There are somewhere around nine toilet flushing frameworks, they include:
- The tank fill valve framework
- The flapper flush valve framework
- The siphon flush mechanics
- The wash-down latrine
- The pressing assisted framework
- The gravity flush framework
- The double cyclone framework
- The double flush
The flush frameworks are developing with the ceaseless development in current science and innovation.
How to Adjust Dual Flush Toilet Mechanism?
There are a few steps that will help you in adjusting your dual-flush mechanism:
- Remove the Toilet Lid
- Adjust the water level
- Flush The Toilet
1. Remove the Toilet Lid
First of all remove the toilet lid, for this unscrew the push buttons that are present on the lid of the tank. Always go in an anticlockwise direction for unscrewing. And if it doesn’t work, don’t worry. Press down one pin and remove the other pin located underneath. Repeat the process for the second pin. In this way, you can easily remove the tank lid.
2. Adjust the water level
It’s not difficult to adjust the water level in dual flush toilets. There is a float present on the left side of the tank, its function is to control the level of water that you choose for a flush. It is a ring-shaped structure.
There are two different ways to change the level, contingent upon the valve. One is by a screw that is located on the top of the fill valve. Fixing this screw clockwise brings down the water while extricating it counterclockwise permits the float to ascend higher as the tank fills. The alternate method to change the water level is by squeezing together the different sides of the lock that append the float valve to the fill valve.
In case you are raising the water level, be calm, as when you begin changing the water level in the double flush toilet, you will see that water starts to release in the tank. This is not something to worry about. The water will close off when it arrives at its new level. Similarly, in case you are bringing down the water level, you will not perceive any progressions until after the following flush. Which is the subsequent stage.
3. Flush The Toilet
Now, it’s time to flush the toilet by pressing the buttons located on the top of the water tank lid. Water will leave the tank and afterward top off. Now, observe the new adjusted water level. In case it is as yet not at the right level, make further changes. Flush is important to check.
Wrapping up
When you are content with the water level, supplant the top. Screw back in the double flush get together and press the buttons into place if you eliminated them. Since you’ve changed your first double flush toilet, make comparative acclimations to other double flush toilets in your home on a case-by-case basis.
FAQ’s
