Usually what happens is, the toilet doesn’t flush, it just fills with water, making it difficult for the waste to move out. A clogged toilet could be the biggest problem you’ve to deal with. In fact, it is not only a problem. It is a pretty disgusting and embarrassing situation especially if you’ve guests around. That is why it is important to know what things you should try to unclog a toilet before you decide to call a plumber.
However, using a plunger is the most effective way to unclog a toilet. A plunger is easily available in the market and does a great job if you know how to use it. It simply sucks all the waste clogged inside your toilet or pushes it to move further, resulting in clearing up your toilet.
There could be different methods for unclogging your toilets that we’re about to discuss next.
How to Unclog a Toilet When Nothing Works?
If you’re somebody who has tried different things to unclog your toilet but nothing worked, that’s probably because you haven’t checked on the water level in the tank yet. The first thing you should do is check the tank. Less or no water in the tank could be the reason that you have a clogged toilet.
The next thing you can do is to check the water supply and if all the pipes are correctly connected to the toilet. Verify that water is flowing directly into the toilet tank by checking the shut-off valve at the back of the toilet. Flush the toilet twice or thrice, and it would probably be unclogged.
How do you unclog a toilet quickly?
The easiest thing you can try is to take 1 cup of baking soda and 2 cups of vinegar. Pour them into the toilet bowl and leave for about 20 to 30 minutes. Then flush the toilet once or twice and it would probably be unclogged.
Best Way to Clear a Clogged Toilet
Out of so many methods of unclogging your toilets, the most common one is by using the plunger. Make sure you use enough force to get a good suction with the help of a plunger. Then, flush the toilet with one or two plunges. This would probably be enough to solve the problem of your clogged toilet.
How to Use Plungers?
It is possible to use plungers both ways. By pushing water through the clog, they break it up. While on the other side, they can create a lot of suction in an effort to pull the clog to the surface. Toilet plungers force pressure against the toilet’s U-trap to clear blockages. In order for the bowl to drain, it needs to be pushed out by force.
- The correct way to use a toilet plunger is to slowly lower it into the water and then let it fall into the drain hole. Once you have a good seal, press firmly on the plunger edge.
- In a controlled manner, press down quickly. Draining the water is what you’ll need to do.
- Pull the plunger quickly up after it has been depressed fully. Be careful not to let water splash all over the place when using the plunger.
- When you see the water draining rapidly, you know you’ve succeeded. Rinse off the plunger in a shower or large sink after spraying it with cleaner.
- While you submerge the plunger in the bowl, ensure that the rubber ring is inserted directly into the drain opening.
- For 20 seconds, move the plunger handle in and out with quick, focused thrusts. Make sure the plunger does not come out of the drain.
- Make sure the plunger is angled for maximum suction. Keep pushing and pulling until the water has been released.
You may further read the details about the use of Plunger at Click Here.
Unclogging a Toilet Without a Plunger
Other than the use of a plunger, there are few other really effective options in order to unclog your clogged toilets. Let’s take a look on how you can deal with the clogged toilets.
For the unclogging of clogged toilets, you may use:
- Hot water and dish soap
- A Toilet Snake
- Household Bleach
- Wire hangers
- Vacuum Valve
- Brush Battle
- Epsom Salt
1: Using Hot Water and Dish Soap
Without getting into the complex procedures, the very first thing you should try is to add hot water into the bowl, as it would contribute to the breaking of clogged waste, and then add some dishwasher soap into it. The dishwasher soap also speeds up the breaking of a clog.
You can also use baking soda and vinegar instead of a dishwasher. For this, you’ll first have to add half a cup of baking soda and then, after a few minutes, add almost 2 cups of vinegar. This would disperse the clog. Now, flush the toilet.
2: Use a Toilet Snake
Another method you may try is to use a toilet snake. A Toilet snake is a long, snake-shaped metal spring that is pushed down to the drain to dislodge the clog. Once you feel the snake has reached down the drain, gently twist the snake to dismantle the clog.
3: Use Household Bleach
Bleach can also help in clearing the clog in your toilet, as it is high in chlorine which helps in the breakdown of organic matter. Just add 2 to 3 cups of bleach into the bowl and wait for a few minutes. When you know it has reached down the drain pipe and has settled there, flush your toilet to see if the clog has been cleared.
4: Use Wire Hangers
You can form a long wire by untwisting a spare wire hanger at your home. Cover the hook of this hanger with an extra piece of towel and then feed it down until it reaches the drain. Now, twist the wire and keep doing so until you notice that water has started to drain. At last, flush the bowl to clear all the waste.
5: Use a Vacuum Valve
The regular vacuum cannot be used for the unclogging of your toilet. You’ll need a toilet vacuum for this. Firstly, empty the bowl. There should be no water left in there.
Next, seal the hose with an old rag and stick the vacuum a few inches down the drain. As it has reached down the drain where the clog lies, it would suck the clog as soon as you turn the vacuum on.
6: Use a Toilet Brush
A toilet brush would be enough to clear the clog if there isn’t too much clogging inside your toilet. All you have to do is pour down the bristles of the brush into the drain. Pump it up and down few times and you’ll feel the clogs clearing up. After this, flush the toilet to ensure the clogs have been cleared.
7: Use Epsom Salt
Epsom salt could do a great job in unclogging your toilet. All you have to do is, pour some Epsom salt into your toilet bowl. Then wait for a few minutes and twill dissolve the clog present inside your drain pipe. Then flush the toilet to ensure the clog has been cleared.
Will a toilet eventually unclog itself?
A toilet may unclog itself eventually if it is not too heavily clogged. For example, in case of clogged tissue papers or something that is degradable and would get dissolved in the toilet water gradually, it would unclog the toilet on its own. Normally the pressure of a flush will be sufficient to clear pipes after the clog has had time to break down.
For your concerns related to unclogging of the toilet, you may also read from There.
Few Best Ways to Unclog a Toilet
Other than the methods mentioned above, you may try the following ways to unclog a toilet:
- Use a plastic bottle to create water pressure
- Try the Bathroom Bomb technique
- Contact a Plumber
1: Use Plastic Bottle to Create Water Pressure
For this, you’ll first need to empty the bowl as much as you can. For the emptying of the bowl, you may use a Squirt Gun Toilet Drainer. It works by pouting the gun into the bowl and then pulling its handle at the back. By doing so, it sucks water from the bowl and you can then squirt this water into a bucket.
Now, to create pressure, take a plastic bottle and fill it with warm water. Wear rubber gloves on your hands and put your thumb on the opening of the bottle (in place of its closing cap). Then put the top end of this bottle on the bottom of the bowl. Pull your thumb off the bottle and squeeze it so that the water inside it runs down the pipe with pressure. This would cause the obstruction to be dislodged.
2: Bathroom Bomb Technique
Take 2 cups of baking soda and pour a half cup of dishwasher into it. Then add ¼ cup of Epsom salt. You can pour the mixture in the cup liners and let it dry overnight. Next morning, add one of these into the toilet bowl along with 4 cups of water and wait for a few hours.
The mixture would settle down in a few hours and unclog your toilet.
3: Contact a Plumber
If you’ve tried several things but nothing worked out, you must call a plumber. Or even if you’re not willing to treat your toilet on your own, simply contact a plumber and let him fix the issues for you.
Does Coke really unclog drains?
It is true that Coke is quite caustic and effective at removing buildup in drains. Also, it is not as harsh as the commercial drain cleaners. When using the coke to clear up the drains, make sure you let it settle for at least an hour for the best results. Then, turn on hot water and drain it all away.
Dealing with a clogged toilet is not an impossible task if you try to do it with patience. We have described some of the best ways that would definitely work to unclog your toilets by yourself. But still, if you don’t feel like doing it on your own, you may simply call a plumber to get it done for you.